On Floors: My Experience Explained

Important Notes You Should Jot down on Wood Floor Moisture

There are layers contributing to moisture problems like what is said by Todd Shupe LSU which is quite common when working to avoid on wood floor moisture. Just acclimating as well as installing flooring product on its own is just one of the many steps that have to be done to effectively and successfully install wood flooring products.

If for example that the wood floor is installed over concrete slab, this is regardless if there’s a separate subfloor, the moisture picture in concrete slab may bring some issues on the finished flooring. Say that the new slab is not thoroughly dried to finished specs, that moisture is going to wick through the surface of concrete and can cause anything from adhesive failure, wood warping or cupping.

As a matter of fact, Todd Shupe LSU discussed at the same time that moist patches or cracks can develop in older slab which is more than enough to work its way up to the surface causing moisture that will later compromise wood flooring. Basically, even with the usual vapor barrier, it would not stop moisture to create problem if the slab is not dried properly. In relation to this, it is imperative to carry out wood floor moisture testing on concrete and have a thorough understanding of it.

Relative humidity testing that is making use of situ problems is actually reliable for concrete moisture conditions. Other test methods consist of poly film test or calcium chloride testing which is somewhat problematic in the past and thus, discontinued gradually by various organizations. There are other varieties of meters such as surface concrete meters that might be useful at times in taking relative readings in current slabs to be able to figure out areas for further testing with the real quantitative moisture testing approaches. Surface concrete meters don’t provide thorough picture of moisture conditions in the slab and for that, true quantitative testing should be done as what suggested by Todd Shupe LSU.

For a flooring contractor, not most will likely perform RH testing but it should be as it does so well in reviewing job specifications and show test results which are imperative before the installation begins. Wood floor moisture problems in concrete slab may just be not part of your accountability but mind you because leaving this unchecked would bear you trouble down the road. This is why Todd Shupe LSU informs contractor to always deal with this issue professionally. Incorrect moisture condition in wooden subfloor can lead to moisture related issues in finished floor.

Whether you believe it or not, Todd Shupe LSU has got the relevant information for this particular subject which will significantly expand your knowledge.